EVA PRO PLUS is a full replacement pressure relieving mattress with automated patient repositioning capabilities that intelligently adjusts its settings based on individual patient needs. With single-touch operation, it autonomously repositions patients every 30 minutes, eliminating the need for caregiver intervention. Unlike standard healthcare practices where manual repositioning occurs only once every two hours—often reducing tissue tolerance—EVA PRO PLUS performs six automated repositioning cycles within the same timeframe, significantly enhancing tissue tolerance and minimizing the risk of pressure injuries. Throughout all movements, the system maintains peak interface pressure below 32 mmHg, ensuring unrestricted blood flow and optimal patient care.
Product Description
Not every patient who needs automated repositioning is in a hospital bed. Some are recovering at home, on a mattress that has to work as hard as any hospital-grade surface. The EVA Pro Plus was built for that wider range, adding deeper cushioning to the same automated repositioning technology.
What Is the EVA Pro Plus Automated Repositioning Mattress?
The EVA Pro Plus is an automated repositioning mattress that replaces the standard mattress and repositions patients on its own, every 30 minutes, in hospitals, clinical settings, and at home. It adds a deeper 20 cm cushion over the standard EVA Pro’s 10 cm profile, giving heavier or higher-risk patients more support.
We built the EVA Pro Plus for care settings that need the same repositioning technology with extra cushioning underneath. The mattress adjusts automatically to patient’s weight and height, so setup takes one button press instead of a manual assessment.
How Does the EVA Pro Plus Automated Repositioning Work?
The EVA Pro Plus cycles pressure across its air cells every 30 minutes, completing six repositioning cycles every two hours instead of the 2 to 4 hours typical of manual turning.
Repositioning Cycle
Pressure points shift every 5 minutes within each cycle, and transitions between channels stay smooth and proportional, so patients don’t feel sudden pressure changes during automated repositioning.
Who Is the EVA Pro Plus Mattress For?
The EVA Pro Plus mattress suits hospitals, clinical care settings, and home care for bedbound or immobilized patients who need deeper cushioning alongside automated repositioning. It fits care plans where a caregiver can’t manage a strict manual turning schedule around the clock.
Frequently Asked Questions
What’s the difference between the EVA Pro and EVA Pro Plus mattress?
Both use the same automated repositioning technology, cycling patients every 30 minutes with six cycles per two hours. The EVA Pro Plus adds a deeper 20 cm cushion, compared with 10 cm on the standard EVA Pro, for heavier or higher-risk patients.
Can the EVA Pro Plus be used for home care?
Yes. The EVA Pro Plus automated repositioning mattress suits hospitals, clinical settings, and home care for bedbound or immobilized patients. Its single-button interface makes it practical for caregivers managing care outside a clinical setting.
How often does the EVA Pro Plus reposition patients?
The EVA Pro Plus repositions patients automatically every 30 minutes, completing six cycles within two hours. That’s more frequent than manual turning schedules, which typically run every 2 to 4 hours.
Documents
Features
-
Key Features of the EVA Pro Plus Mattress
We built the EVA Pro Plus to add support without adding complexity.
- Deeper 20 cm cushion for higher-risk or heavier patients
- Single-button interface that starts automated repositioning without manual programming
- Automatically adjusts to patient weight and height
- Low-friction, waterproof polyurethane cover that resists shear force and wipes clean
- Power failure management that holds pressure for 10 hours
- Suitable for hospital, clinical, and home care settings
Technical Specification
Control Unit (Model CXIP42)
| Power input | 100-240V, 50-60Hz |
| Power consumption | 0.0010 kW/h |
| Operating modes | VLP / CLP / Maxfirm |
| VLP cycle time | 12-15 minutes |
| Unit weight | 3 kg |
| Humidity tolerance | Below 95% |
| Electrical classification | Class 3, Type BF |
Mattress (Model CXIM42)
| Dimensions (W x L x H) | 90 x 200 x 20 cm |
| Weight | 5 kg |
| Cover material | Waterproof, low-friction polyurethane |
| Max interface pressure | Below 32 mmHg |
Comparison
Comparison Between Manual and Automatic Repositioning
| Automatic Repositioning | Manual Repositioning |
|---|---|
| Dynamic interface pressure for better weight redistribution | High interface pressure on tilted side due to concentrated weight |
| Minimal & adjusts pressure smoothly with consistent skin support | High risk for friction & shear during manual turning or adjustment |
| Eliminates physical strain & effort for caregiver providing consistent care | High caregiver effort required especially when the patient is obese |
- Automatic lateral turning at regular intervals
- Dynamic interface pressure redistribution
- Ensures consistent and effective repositioning
- Reduces caregiver workload and enhances patient comfort
- Works 24/7 without requiring manual intervention
Let's Chat, Reach Out to Us
Have questions or feedback? We're here to help. Send us a message, and we'll respond within 24 hours
